3M™ Cold Shrink Insulator, 8426-9M, includes mastic pads, 2-4/0 AWG (30-90 mm²), up to 1 kV
- 3M ID 7000132877
- UPC 00054007434368
Details
Highlights
- Quick and easy installation, no special tools and no heat required
- Seals tight, retains resiliency and pressure
- Accommodates a wide range of cable sizes
- Resists acids, alkalis and ozone
- Includes mastic strips for extra range taking
- WATER-RESISTANT SEAL: Meets the water-resistant requirements of ANSI C-119.1
- WORK YOUR WAY: Accommodates a variety of cable sizes that can be used in direct burial or submersible applications
- LONG-LASTING: Maintains thermal stability, resiliency, and pressure for dependable performance
This splice meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.
3M™ Cold Shrink Tubes are designed using a unique cold shrink delivery system. Products are supplied pre-stretched on a removable core for efficiency and ease of installation. Removal of the core (unwind) after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation. This item includes 3M™ Mastic Pads for cable O.D. build-up for cable size transition splices.
Typical Properties
Similar products
| Applications | Insulation, mechanical protection, repair | |
| Brands | 3M™ | |
| Cable Insulation Outside Diameter Range | 0.4 in - 1.18 in | |
| Cable Shielding | Tape Shield, UniShield®, Wire Shield, Non-shielded | |
| Cable Type | Power Cable | |
| Case Quantity | 10 | |
| Conductor Material | Aluminum, Copper | |
| Conductor Sizes (Imperial) | 1 AWG, 2 AWG, 1/0 AWG, 2/0 AWG, 3/0 AWG, 4/0 AWG | |
| Conductor Sizes (Metric) | 120 mm² | |
| Connector Included | No | |
| Dielectric Strength (V/mil) | 365 V/mil | |
| Elongation | 750 % | |
| Halogen Free | No | |
| Indoor/Outdoor | Both | |
| Inner Diameter After Shrink (Imperial) | 0.398 in | |
| Inner Diameter After Shrink (Metric) | 10.1 mm | |
| Inner Diameter Before Shrink (Imperial) | 1.185 in | |
| Inner Diameter Before Shrink (Metric) | 30.1 mm | |
| Material | EPDM Rubber | |
| Maximum Conductor Size (Imperial) | 177 kcmil |
3M™ Cold Shrink Insulator, 8426-9M, includes mastic pads, 2-4/0 AWG (30-90 mm²), up to 1 kV
3M™ Cold Shrink Quick Insulators QI Series20 of 38
