3M™ Heat Shrink Thin-Wall Tubing, FP-301, black, 1/2 in x 48 in (1.27 cm x 121.92 cm)
- Rated for 135°C (275° F) continuous operation
- Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
- 2:1 shrink ratio
- Flexible and split resistant
|
|
|
|---|---|
|
Agency Approvals
|
CSA, UL Recognized
|
|
Brand
|
3M™
|
|
Colour Family
|
Black
|
|
Elongation
|
175 %, 400 %
|
|
Expanded Inner Diameter
|
0.5 in
|
|
Expanded Inner Diameter (metric)
|
12.70 mm
|
|
Flame Retardant
|
Yes
|
|
Flammability Rating
|
UL 224 All Tubing Flame Test
|
|
Inner Diameter After Shrink (Imperial)
|
0.25 in
|
|
Inner Diameter After Shrink (Metric)
|
6.35 mm
|
|
Inner Diameter Before Shrink (Imperial)
|
0.5 in
|
|
Inner Diameter Before Shrink (Metric)
|
12.7 mm
|
|
Manufacturing Origin
|
USA
|
|
Material
|
Polyolefin
|
|
Maximum Operating Temperature (Celsius)
|
135 °C
|
|
Maximum Operating Temperature (Fahrenheit)
|
275 °F
|
|
Mil Spec
|
SAE-AMS-DTL-23053/5, Class 1
|
|
Minimum Expanded Tubing I. D.
|
0.5 in
|
|
Minimum Shrink Temperature (Celsius)
|
100 °C
|
|
Non-Corrosive
|
Yes
|
|
Operating Temperature (Celsius)
|
-55 to 135 Degrees Celsius
|
|
Operating Temperature (Fahrenheit)
|
-67 °F to 275 °F
|
|
Operating Temperature Range (Celsius)
|
-55 °C to +135 °C
|
|
Operating Temperature Range (Fahrenheit)
|
-67 °F to 275 °F
|
|
Overall Length (Imperial)
|
48 in
|
|
Overall Length (Metric)
|
1.219 m
|
|
Product Colour
|
Black
|
|
Product Form
|
48 in (1.22 m) sticks with header label
|
|
Product Key
|
FP01 FP301 FPA
|
|
Recovered Inner Diameter
|
0.25 in
|
|
Recovered Inner Diameter (metric)
|
6.4 mm
|
|
Shrink Ratio
|
2:1
|
|
Size
|
0.50 Inch
|
|
Size (metric)
|
12.7 mm
|
|
Solution for
|
Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories
|
|
Tensile Strength (Imperial)
|
2400 Pound-Force Per Square Inch
|
|
Tubing Type
|
Single Wall (Thin)
|
|
UL Bug Temperature (Celsius)
|
125 Degrees Celsius
|
|
UL Bug Temperature (Fahrenheit)
|
257 Degrees Fahrenheit
|
|
UL Bug Voltage
|
600 Volt
|
|
UL File Number
|
E-39100
|
|
Units per Case
|
12
|
- Rated for 135°C (275° F) continuous operation
- Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
- 2:1 shrink ratio
- Flexible and split resistant
- Rated for 600V applications
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.
3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.
Suggested Applications
- Typically used as shrink-fit electrical insulation over cable splices and terminations
- Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
