3M™ Heat Shrink Thin-Wall Tubing, FP-301, black, 1 1/2 in x 48 in (3.81 cm x 121.92 cm)
- 3M ID 7000133604
- UPC 10051128598457,50051128598455,00051128598450
Specifications
Details
Highlights
- Rated for 135°C (275° F) continuous operation
- Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
- 2:1 shrink ratio
- Flexible and split resistant
- Rated for 600V applications
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.
3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.
Suggested applications
- Typically used as shrink-fit electrical insulation over cable splices and terminations
- Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
Resources
Related Products
| Additional Flammability Rating | 23053/5 class1 | |
| Agency Approvals | UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637 | |
| Applicable SAE-AMS-DTL-23053 Specifications | 23053/5 class 1 | |
| Brands | 3M™ | |
| Elongation | 400 % | |
| Expanded Inner Diameter | 1.5 in | |
| Expanded Inner Diameter (metric) | 38.10 mm | |
| Flame Retardant | Yes | |
| Flammability Rating | UL 224 All Tubing Flame Test | |
| Inner Diameter After Shrink (Imperial) | 0.75 in | |
| Inner Diameter After Shrink (Metric) | 19.05 mm | |
| Inner Diameter Before Shrink (Imperial) | 1.5 in | |
| Inner Diameter Before Shrink (Metric) | 38.1 mm | |
| Material | Polyolefin | |
| Maximum Operating Temperature (Celsius) | 135 °C | |
| Maximum Operating Temperature (Fahrenheit) | 275 °F | |
| Mil Spec | SAE-AMS-DTL-23053/5, Class 1 | |
| Minimum Shrink Temperature (Celsius) | 100 °C | |
| Non-Corrosive | Yes | |
| Operating Temperature (Celsius) | -55 to 135 Degrees Celsius |
