1. Canada
  2. All 3M Products
  3. Electrical
  4. Wire & Cable
  5. Tubing & Molded Parts
  6. Heat Shrink Tubing
  7. 3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing, EPS-300, black, 3/4 in x 48 in (1.91 cm x 121.92 cm)

3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing, EPS-300, black, 3/4 in x 48 in (1.91 cm x 121.92 cm)

  • 3M ID 7000133617

3:1 shrink ratio

When freely recovered, the tubing will shrink 33% of its as-supplied diameter

The recovered wall thickness of the tubing is proportional to the degree of recovery

View more details

Details

Highlights
  • 3:1 shrink ratio
  • When freely recovered, the tubing will shrink 33% of its as-supplied diameter
  • The recovered wall thickness of the tubing is proportional to the degree of recovery
  • Operating temperature range is from 55°C (-67°F) to 110°C (230°F), with a shrinking temperature minimum of 121°C (250°F)
  • Forms a bond with a wide variety of rubbers, plastics and metals
  • Upon cooling, the adhesive forms a water-resistant barrier
  • Has a 3:1 shrink ratio

3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing EPS-300 is a 3:1 thin-wall tubing that offers the advantages of integral, adhesive-lined construction.

3M™ Heat Shrink Thin-Wall Flexible Polyolefin Adhesive-Lined Tubing EPS-300 is made from flame-retardant, flexible polyolefin that is lined with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively radiation cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics. It helps provide environmental protection for electronic components, twister pigtail and inline wire splices, crimp splices, wire bundles and wire harness breakouts in automotive, truck fleet, marine and industrial applications. When heated in excess of 121°C (250°F), the tubing rapidly shrinks to a skin-tight fit, forcing the melted adhesive lining to flow and cover the substrate. The adhesive forms a flexible bond with a wide variety of rubbers, plastics and metals. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water-resistant barrier. Adhesive reflow will occur at temperatures above 80°C (176°F). This product is UL Recognized (all colours except clear, file E-157227) at 600 volts to a maximum of 125°C and is CSA Certified (CSA file LR38227).

Suggested applications
  • Protection for electronic components, twister pigtail and inline wire splices, crimp splices, wire bundles and wire harness breakouts in automotive, truck fleet, marine and industrial applications
  • Forms a flexible bond with a wide variety of rubbers, plastics and metals

Typical Properties

Resources