3M™ Heat Shrink Multiple-Wall Polyolefin Tubing, EPS-400, black, .350 in x 48 in (0.89 cm x 121.92 cm)
- 3M ID 7000148860
Details
Highlights
- 4:1 shrink ratio
- When fully recovered, the tubing will shrink 25% of its as-supplied diameter
- Recovered wall thickness of the tubing is proportional to the degree of recovery
- Operating temperature range is from -55°C (-67°F) to 110°C (230°F)
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- UL Listed, CSA Certified and RoHS 2011/65/EU Compliant
3M™ Heat Shrink Multiple-Wall Polyolefin Tubing EPS-400 offers superb environmental protection for electronic components, wire splices, wire bundles and harness breakouts.
3M™ Heat Shrink Multiple-Wall Polyolefin Tubing EPS-400 is medium-wall, semi-rigid tubing that offers the advantages of integral, adhesive-lined construction. The tubing is made from flame-retardant, flexible polyolefin with an internal layer of special thermoplastic adhesive. The heat-shrinkable outer wall is selectively cross-linked, while the adhesive maintains high flow and excellent adhesion characteristics. When heated in excess of 121°C (250°F), 3M™ Heat Shrink Multiple-Wall Polyolefin Tubing EPS-400 rapidly shrinks to a skin-tight fit, forcing the melted adhesive to flow and cover the substrate. Upon cooling, the adhesive solidifies, forming a permanent, non-drying, flexible and water-resistant barrier. Adhesive reflow will occur at temperatures above 80°C (176°F). The tubing is also UL Recognized (file E-157227).
Suggested applications
- Protection for electronic components, wire splices, wire bundles and harness breakouts
- Automotive, truck and marine wire splices and harness breakouts are protected from a variety of harsh environments
Typical Properties
