3M™ Rejacketing Sleeve, RJS-2-10FT, 10 ft (3 m) coil, 3.3-15 kV
- 3M ID 7100005779
- UPC 00054007431015
Details
Highlights
- Installs quickly and accommodates a wide range of cable sizes
- No torches, heat or special tools required
- Seals tight and retains resiliency and pressure
- Excellent resistance to ozone and ultra-violet radiation
- Easy to adjust sleeve length
- Good solvent resistance
- Comes in one 10-foot (3 m) coil
- Designed to be used in conjunction with 3M™ Cold Shrink Breakout Boots and 3M™ Silicone Rubber Terminations
3M™ Rejacketing Sleeves RJS Series are designed so that 3M™ Cold Shrink QT-III and Q-TIII Silicone Rubber Terminations can be used on 3/C (three conductor) medium voltage shielded power cables of tape shield, wire shield, armoured and non-armoured configurations. Rejacketing sleeves are designed to protect the phase legs (core) of 3/C shielded power cable from exposure to moisture, corrosion, ozone, ultra-violet radiation, physical contact and other hazards that are associated with termination operating environments. The 3M™ Rejacketing Sleeve RJS-2 is to be used in conjunction with 3M™ Cold Shrink Breakout Boots and Silicone Rubber Terminations. The 3M™ Rejacketing Sleeve RJS-2 has a metallic shield diameter range of 0.6-0.8 inch(15.2-20.3 mm), a voltage range of 3.3-15 kV and one 10-foot coil per case.
Suggested applications
- Protect shielded phase legs (cores) of 3/C medium voltage (35 kV and less) power cables after the jacket has been removed in preparation for terminating
Typical Properties
