Heat Shrink Tubing Roll 1
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
3M Heat Shrink Thin-Wall Tubing, FP-301, blk,0.48 cm x 30.48 m
|
|
---|---|
Brand
|
3M™
|
Colour Family
|
Black
|
Elongation
|
400 %
|
Expanded Inner Diameter
|
3 in
|
Expanded Inner Diameter (metric)
|
76.2 mm
|
Flame Retardant
|
Yes
|
Flammability Rating
|
UL 224 All Tubing Flame Test
|
Inner Diameter After Shrink (Imperial)
|
0.093 in
|
Inner Diameter After Shrink (Metric)
|
2.36 mm
|
Inner Diameter Before Shrink (Imperial)
|
0.187 in
|
Inner Diameter Before Shrink (Metric)
|
4.75 mm
|
Manufacturing Origin
|
USA
|
Material
|
Flexible Polyolefin
|
Maximum Operating Temperature (Celsius)
|
135 °C
|
Maximum Operating Temperature (Fahrenheit)
|
275 °F
|
Mil Spec
|
AMS-DTL-23053/5, Class 1
|
Minimum Expanded Tubing I. D.
|
3 in
|
Minimum Shrink Temperature (Celsius)
|
100 °C
|
National Stock Number
|
5970009541622
|
Non-Corrosive
|
Yes
|
Operating Temperature (Celsius)
|
-55 to 135 Degrees Celsius
|
Operating Temperature Range (Celsius)
|
-55 °C to +135 °C
|
Operating Temperature Range (Fahrenheit)
|
-67 °F to 275 °F
|
Overall Length (Imperial)
|
100 ft
|
Overall Length (Metric)
|
30.5 m
|
Product Colour
|
Black
|
Product Key
|
FS05 FP-SM 3/16 FPA
|
Recovered Inner Diameter
|
0.093 in
|
Recovered Inner Diameter (metric)
|
38.1 mm
|
Shrink Ratio
|
2:1
|
Solution for
|
Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories
|
Tensile Strength (Imperial)
|
2400 Pound-Force Per Square Inch
|
Tubing Type
|
Single Wall (Thin)
|
UL File Number
|
E-39100
|
Units per Case
|
3
|
3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.
3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.