3M™ Heat Shrink Thin-Wall Tubing, MFP, clear, 3/16 in x 48 in (0.48 cm x 121.92 cm)
- 3M ID 7100067568
- UPC 00051128597439
Details
Highlights
- Outstanding abrasion resistance and cut-through properties
- Inherently flame retardant and highly resistant to most industrial fuels, chemicals and solvents
- Transparent insulation allows see-through inspection and identification
- Semi-rigid
- Withstands temperatures of -67 to 347 degrees F (-55 to 175 degrees C)
- Flame-retardant tubing is rated for 600V applications
3M™ Heat Shrink Thin-Wall Tubing MFP is a high performance tubing good for engine compartment applications. It has outstanding abrasion resistance, is inherently flame retardant and highly resistant to most industrial fuels, chemicals and solvents.
3M™ Heat Shrink Thin-Wall Tubing MFP is fabricated from polyvinylidene fluoride, and has outstanding abrasion resistance and cut-through properties in combination with high dielectric strength. It is inherently flame retardant, semi-rigid and highly resistant to most industrial fuels, chemicals and solvents. When heated in excess of 347°F (175°C), 3M™ Heat Shrink Thin-Wall Tubing MFP rapidly shrinks to a skin-tight fit.
Suggested applications
- Automotive wiring, jackets, fuse coverings and military wire markers
- Shrink-fit protection and strain relief of wires, solder joints, terminals and connections
Typical Properties
Legal disclaimer
Manufacturing Origin: USA
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
The designation that a product is Manufactured in the USA means the product undergoes substantial transformation in one of our U.S. Manufacturing plants. Some products contain imported components.
Note: 3M products offered on a government contract that require country of origin representation must be certified by 3M Trade Compliance. Contact customer service at 800-245-3573 to request a certificate.
