3M™ Hot Melt Adhesive 3797TC, Off-White, 5/8 in x 2 in (1.59 cm x 5.08 cm), 11 lb (4.98 kg), Case

3M™ Scotch-Weld™ Hot Melt Adhesive 3797 is a temperature-resistant, low-viscosity adhesive which flows easily into small areas for effective coverage and protection, ideal for electrical potting. This 100% solids thermoplastic adhesive also provides a quick 30-second open bead time for potting even at depth. It is best used with our 3M™ Scotch-Weld™ Hot Melt Applicator PG II and is excellent for high volume operations.

Ideal as an electrical potting adhesive and for other applications involving electrical and electronic components, our 3M™ Scotch-Weld™ Hot Melt Adhesive 3797 is a 100% solids thermoplastic low melt adhesive that combines low viscosity with high temperature resistance. This makes it ideal for applications where protection and long-term stability are critical. This hot melt adhesive is formulated to flow easily and smoothly into small areas such as those on printed circuit boards and for quick set times - about 30 seconds of open time for effective deep potting and for added efficiency in high-volume jobs. Hot melt adhesives/hot-glue sticks have a relatively hot melting point that ranges between approximately 250-380°F/121°C, depending on the formulation, and are applied with hot-melt applicators, commonly referred to as hot-glue guns. Hot-melt glues provide a nearly instant bond between many plastics, paper and wood, but when the bond is reheated, some varieties will soften, allowing the bonded surfaces to be separated. The quick-stick nature of hot-melt adhesives speeds up operations in packaging and production.