1. Canada
  2. All 3M Products
  3. Building Materials
  4. Fire Protection
  5. Firestop Sealants, Foams, Putties & Mortars
  6. 3M™ Fire Barrier Water Tight Sealant, 3000 WT, 20 fl. Oz (591.5 mL)

3M™ Fire Barrier Water Tight Sealant, 3000 WT, 20 fl. Oz (591.5 mL)

  • 3M ID 7000140768
  • UPC 00051141081960
Container Size (Metric) 591 mL
Container Size (Imperial) 20 fl oz
Product Type Sealant

Light grey colour with black flecks, no mixing required

Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115

Fire Resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)

View more details
Frequently viewed resources
PDF (1) Copy 26Safety Data Sheet (PDF)

Details

Highlights
  • Light grey colour with black flecks, no mixing required
  • Firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
  • Fire Resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
  • Meets UL Water Leakage Test, W Rating — Class 1 requirements
  • Meets optional L-Rating Requirements (smoke seal)
  • Minimizes noise transfer — STC-rating of 53 when tested in STC 54-rated wall assembly
  • Sag-resistant, re-enterable and repairable
  • Halogen free
  • Excellent adhesion, weatherability and caulk rate
  • Meets UL 1479 aging requirements

The 3M™ Fire Barrier Sealant 3000 WT is a ready-to-use, high-performance, single component, neutral cure, silicone firestop that also acts as a barrier to water leakage and airborne sound transmission. It provides up to 4 hours fire protection.

3M™ Fire Barrier Water Tight Sealant 3000 WT helps control the spread of fire, smoke and noxious gasses before, during and after exposure to a fire when installed in accordance with a listed through penetration or fire-resistive joint assembly. 3M™ Fire Barrier Water Tight Sealant 3000 WT meets UL Water Leakage Test, W Rating – Class 1 requirements for systems tested and listed in accordance with ANSI/UL 1479 & CAN/ULC S115 and is tested in accordance with ASTM G 21 standard practice for determining resistance of synthetic polymeric materials to fungi.

Typical Properties

Resources

Ask a 3M Expert