3M™ Fire Barrier Putty Sleeve Kit, DT 200, round, 2 in (5.1 cm)
- 3M ID 7000145571
- UPC 00051115188084
Details
Highlights
- Ready-to-install kit for a complete cable or blank firestop installation
- Tested up to 4 hours for fire-rated through penetration systems in accordance with ASTM E 814 (UL 1479)
- Blank sleeve (0% cable fill) accommodates future cable installation
- Two-piece split/hinged design for easy retrofit installation on existing cables
- Suitable for installation in gypsum wallboard and concrete walls or floors
- No gasket required
The 3M™ Fire Barrier Putty Sleeve Kit DT 200 allows for both new and retrofit data and telecom cable firestop installations. It features a 2 inch diameter by 12 inch length sleeve (50.8 mm x 304.8 mm).
The 3M™ Fire Barrier Putty Sleeve Kit DT 200 is ideal for high traffic cable penetrations. It can be used as a one-piece sleeve or the sleeve may be split/hinged for existing cable installations. The sleeves can be easily installed in openings that are either tight to the sleeve or irregular. The 3M™ Fire Barrier Putty Sleeve Kit DT 200 can accommodate oversized openings (up to a one-inch larger diameter than the 3M™ Fire Barrier Putty Sleeve diameter).
Suggested applications
- Ideal for existing through-penetration openings with cables, future cable installations (blank openings) or new construction through-penetration openings for power and communication cables. The cable types can be a mixture of the following:
- 100 pr. No. 24 AWG copper conductor telephone cables
- 1/C-750 kcmil copper conductor power cable
- 7/C-No. 12 AWG copper conductor control cables
- Coaxial cables
- 3/C-No 2/0 AWG aluminum conductor SER cable with No. 1 AWG aluminum ground conductor
- No. 23 AWG Category 6 data cables
Typical Properties
Resources
Similar products
3M™ Fire Barrier Putty Sleeve Kit, DT 200, round, 2 in (5.1 cm)
3M™ Fire Barrier Round Pass-Through Device
3M™ Fire Barrier Pass-Through Device, PT4SD, square, 4 in (10.2 cm)
3M™ Fire Barrier Moldable Putty Pads MPP+