1. Canada
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Scotch-Weld™ Structural Plastic Adhesive, DP8010, blue, 1.58 fl. oz. (45 ml)

3M™ Scotch-Weld™ Structural Plastic Adhesive, DP8010, blue, 1.58 fl. oz. (45 ml)

3M ID 7100036717UPC 00051115716003
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites, and metals
  • Medium viscosity allows controlled dispensing
  • Strong adhesive can replace screws, rivets, and welding
 More...
View all details
Specifications
Adhesive Type
Acrylic
Applications
Bonding Composite Materials, Encapsulating, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Potting, Sealing, Small Joint Assembly
Brand
Scotch-Weld™
Design Challenges
Noise Vibration & Harshness Control NVH
Full Cure Time
8-24 Hours @ 72 F (22 C)
Hardness
55-60 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Fahrenheit)
250 °F
Mix Ratio Volume Base:Accelerator
10 : 1
Open Time
10 Minute
Physical Form
Flowable Liquid
Position
Best
Product Colour
Blue
Product Form
Cartridge
Product Type
Acrylic Adhesive
Set Time
10 Minute
Shear Strength
2700 psi
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
1.01
Storage Temperature
<=40 Degree Fahrenheit
Substrate
Ceramic, Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Metal (Painted), Metal (Unpainted), Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Plastics: LSE (Polypropylene, Polyethylene), Smooth, Stone, Wood, Wood & Hardboard
Substrate 1
Glass, Glass & Ceramics, LSE Plastics, Metal, Paint, Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Smooth, Wood, Wood & Hardboard
Substrate 2
Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Paint, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Smooth, Wood, Wood & Hardboard
Units per Case
12
Viscosity
Self-Leveling
Viscosity Range (cps) at Room Temperature
Base: 27,000, Accelerator: 17,000 – 40,000
Work Time
8 Minutes
Details
  • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
  • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites, and metals
  • Medium viscosity allows controlled dispensing
  • Strong adhesive can replace screws, rivets, and welding

3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a blue, two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, corona treatment, or priming. Simply wipe the surfaces with isopropanol to remove mould release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 also bonds metals, ceramics, wood, and most plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil (0.20 mm) spacer beads for bond line spacing. Our 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10-minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C). Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

Suggested Applications

  • Joining plastics to metals, such as in the manufacture or repair of appliances
  • Bonding low surface energy plastics without priming
  • Impact-resistant composite bonding
  • Manufacture or repair of various sporting goods
  • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)