3M™ VentureClad™ Insulation Jacketing Tape, 1577CW-WM, flat, white, 23 in x 50 yd. (58.4 cm x 45.7 m)

3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM is designed for insulation facing and jacketing applications. Highly puncture and tear resistant, this zero permeable jacketing tape is quick and simple to install. It requires no special tools and can be easily cut and used without glues or primers. 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM has a service temperature range from -70˚C to 148˚C (-94˚F to 300˚F), ensuring superior adhesion and strength in all climates.

The white aluminum exterior provides an attractive aesthetic for cladding that is visible when finished while also providing excellent chemical resistance. It provides zero permeability and acts as a vapor barrier for insulation cladding and jacketing applications. This tape was tested in accordance with ASTM E84. The self-adhesive material cuts and installs easily on-site and without the use of special tools. The backing is flexible to conform to curved and irregular surfaces with ease. 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM meets or exceeds most building code requirements – for more information on specific approvals, please refer to the technical data sheet. 3M™ VentureClad™ Insulation Jacketing Tape 1577CW-WM features an aggressive pressure sensitive acrylic adhesive that bonds and seals well in cold temperatures. This adhesive adheres immediately on contact to a variety of materials such as fiberglass, faced fiberglass insulation, mineral wool, polystyrene and flexible aerogel. It applies easily at temperatures as cold as -10°F/-23°C. It can operate at a service temperature as low as -94°F/-70°C and as high as 300°F/149°C. Once bonded, this tape will provide good holding power for extended periods with good aging properties and resists lifting and curling over time. This product is used to protect insulation against UV, ozone, high humidity, salt spray, weather, oil and grease, aggressive chemicals, impact and mechanical abuse, corrosion under insulation (CUI), and moisture vapor intrusion. It works well with many insulation types. Qualifies for compliance credit for LEED®. Additionally, it meets the FDA compositional requirements for indirect food contact.