3M™ Interam™ Endothermic Mat ES-5A-12 product photo

3M™ Interam™ Endothermic Mat E-5A-4, 24-1/2 in x 20 ft. (62.23 cm x 6.1 m) roll

3M Stock

7000031969

Previous 3M Stock

98040056206

UPC

00051115549137

Group Product Shot: 3M(TM) Fire Barrier Composite Sheet CS-195+, group photo used in Spec Guide

3M™ Fire Barrier Composite Sheet CS-195+

Options available
The 3M™ Fire Barrier Water Tight Sealant 1000 NS is a non-slump, ready-to-use, single component, neutral cure, elastomeric silicone firestop that also acts as a barrier to water leakage and airborne sound transmission.

3M™ Fire Barrier Water Tight Sealant 1000 NS

Options available
The 3M™ Fire Barrier Water Tight Sealant 3000WT is a ready-to-use, high-performance, single component, neutral cure, silicone firestop that also acts as a barrier to water leakage and airborne sound transmission.

3M™ Fire Barrier Water Tight Sealant 3000 WT

Options available
The 3M™ Fire Barrier Cast-In Device Height Adaptor 2HA is to be used in conjunction with a 2 inch 3M™ Fire Barrier Cast-In Device. It increases the height of allowable concrete thicknesses by 4 inches (101.6 mm) for installations requiring up to 12 inches (304.8 mm) pour depths.

3M™ Fire Barrier Cast-In Device Height Adaptors

Options available
The 3M™ Fire Barrier Pass-Through Device PT4SD is a firestop solution for electrical, data, communications cable or pipes penetrating fire-rated floors or walls.

3M™ Fire Barrier Round Pass-Through Device

Options available
Fire Barrier Sealant IC Cartridge, 15WB, 10.1 fl. oz.,12/ case

3M™ Fire Barrier Sealant IC 15WB+

Options available
Used in conjunction with the 4 inch square 3M™ Fire Barrier Pass-Through Device, the 3M™ Fire Barrier Pass-Through Single Mounting Brackets provide additional support to the device.

3M™ Fire Barrier Square Pass-Through Brackets

Options available
MDA 7000133834 Englsih CFOP Fire Barrier Cast-In Device.tif

3M™ Fire Barrier Cast-In Device Metal Deck Adaptors

Options available
3M™ Fire Barrier Sealant is a high-performance latex-based intumescent firestop sealant. When properly installed, this product provides up to 4 hours of fire protection in tested and listed systems.

3M™ Fire Barrier Sealant CP 25WB+

Options available
The 3M™ Fire Barrier Moldable Putty Pads MPP+ feature a one-part, ready-to-use, re-enterable, intumescent putty that can be easily formed to firestop wall-openings and through penetrations in fire-rated assemblies.

3M™ Fire Barrier Moldable Putty Pads MPP+

Options available
The 3M™ Fire Barrier Putty Sleeve Kit DT 200 allows for both new and retrofit data and telecom cable firestop installations. It features a 2 inch diameter by 12 inch length sleeve (50.8 mm x 304.8 mm).

3M™ Fire Barrier Putty Sleeve Kits

Options available
The 3M™ Fire Barrier Plastic Pipe Device is a one-piece metal collar assembly encasing 3M™ heat-expanding FS-195+ material.

3M™ Fire Barrier Plastic Pipe Device

Options available
The 3M™ Fire Barrier Water Tight Sealant 1003 SL is a self-levelling, ready-to-use, single component, neutral cure, elastomeric silicone firestop that also acts as a barrier to water leakage and airborne sound transmission.

3M™ Fire Barrier Water Tight Sealant 1003 SL

Options available
PT2MB 7000133842 English CLOP Fire Barrier Pass-Through Mounting Bracket.tif

3M™ Fire Barrier Round Pass-Through Brackets

Options available
3M™ Fire Barrier Rated Foam FIP 1-Step is a firestop foam used to fill the annular space created by pipes and cables penetrating through fire-rated construction. This product foams in place filling the void between the through penetrant (pipe, cable etc) and the wall creating a firestop seal restoring the fire rating of the entire wall.

3M™ Fire Barrier Rated Foam FIP 1-Step

Options available
The 3M™ FireDam™ Spray is a water-based material that dries to form a durable, elastomeric firestop coating. This material, when used as part of an assembly, will firestop building joints, perimeter joints (curtain wall), and through penetration seals.

3M™ FireDam™ Spray 200

Options available
3M(TM) Fire Barrier Watertight Spray, White, 5 gallon pail

3M™ Fire Barrier Watertight Spray

Options available
The 3M™ Fire Barrier Self-Locking Pillow FB249SL is a self-contained, intumescent product that features interlocking strips that allow quick and secure pillow installation in floors or walls.

3M™ Fire Barrier Self-Locking Pillows

3M Stock

B40070036

3M(TM) Fire Barrier Cast-In Device 2 in Non-metallic on white backgound used in PoW Catalogs

3M™ Fire Barrier Cast-In Devices for Metal Pipes

3M Stock

B40065433

The 3M™ Ultra GS Wrap Strip GS-40 is an intumescent firestop wrap. This flexible wrap makes installation easy, allowing you to simply roll out and cut as much material as required to wrap around the penetrant.

3M™ Ultra GS Wrap Strip, GS-40, 2 in x 40 ft. (5.1 cm x 12.2 m) roll

3M Stock

B40070035

UPC

00051115165078

3M™ Fire Barrier Duct Wrap 615+

3M™ Fire Barrier Duct Wrap 615+, 24 in x 25 ft, 1 Roll/Case

3M Stock

B40070031

UPC

00051115549052

3M(TM) Fire and Water Barrier Tape 2 in x 75 in

3M™ Fire and Water Barrier Tape

3M Stock

B40070020

Product Shot: 3M(TM) Expantrol(TM) Flexible Intumescent Strip E-FIS, Black, Adhesive-Backed, 1/16 in x 1/2 in x 50 ft, Roll, 10/case

3M™ Expantrol Flexible Intumescent Strip, E-FIS, black, 1/16 in x 1/2 in x 50 ft. (0.16 cm x 1.3 cm x 15.24 m)

3M Stock

B40070033

The 3M™ Fire Barrier Moldable Putty Stix MP+ are composed of a one-part, ready-to-use, re-enterable, intumescent putty that can be easily formed to firestop through penetrations and blank openings in fire-rated assemblies.

3M™ Fire Barrier Moldable Putty Stix, MP+, 1.4 in x 11 in (3.6 cm x 27.9 cm)

3M Stock

B40070019

UPC

00051115165269

SS-100 7000141019 English CFIP Smoke & Sound Sealant.tif

3M™ Smoke and Sound Sealant, SS100, 28 oz. cartridge

3M Stock

B40065451

UPC

00051141098562

PT2RMB 7100004181 English CFOP Square Mounting Bracket

3M™ Fire Barrier Pass-Through Device, PT4SD, square, 4 in (10.2 cm)

3M Stock

B40065437

UPC

00051115165979

The 3M™ Fire Barrier Wrap Strips FS-195+ are fire-resistive wraps with foil on one side that are designed to firestop penetrations in fire-rated floor, wall and floor/ceiling assemblies.

3M™ Fire Barrier Wrap Strips, FS-195+, 2 in x 24 in (5.1 cm x 61 cm)

3M Stock

B40070034

UPC

00051115071157

Applied 1-layer thick, 3M™ Fire Barrier Plenum Wrap 5A+ creates a fire-resistive enclosure that can reduce the flame spread and smoke spread ratings to acceptable levels for return air plenums.

3M™ Fire Barrier Plenum Wrap, 5A+, 1/2 in x 24 in x 50 ft. (1.3 cm x 61 cm x 15.24 m) roll

3M Stock

B40070030

UPC

00051115188022

The 3M™ Fire Barrier Restricting Collar RC-1 works in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or The 3M™ Fire Barrier Wrap Ultra GS for firestopping penetrations in wall, floor and floor/ceiling assemblies.

3M™ Fire Barrier Restricting Collar, RC-1, 2 in (5.1 cm)

3M Stock

B40070032

UPC

00054007083245

Product Shot: 3M(TM) Fire Barrier Cast-In Tub Box Assembly

3M™ Fire Barrier Cast-In Tub Box Assembly, 3TB, 3 in (7.6 cm)

3M Stock

B40065439

UPC

00051115165863

The 3M™ Fire Barrier Mortar is a lightweight cementitious firestop with variable mix ratios for use in through penetration applications. It allows up to three hours of fire protection in tested and listed systems.

3M™ Fire Barrier Mortar, 44 lb (20 kg) bag

3M Stock

B40065449

UPC

00051115549007

This 3M™ Fire Barrier Cast-In Device for Plastic Pipes 2PCID is an intumescent device that firestops 2 inch (50.8 mm) non-metallic penetrations through fire-rated concrete floor assemblies. It is installed by attaching directly to the form before a concrete slab is poured.

3M™ Fire Barrier Cast-In Devices for Plastic Pipes

3M Stock

B40065430

3M™ Fire Barrier Duct Wrap 615+

3M™ Fire Barrier Duct Wrap 615+

3M Stock

123

no alt_text

3M™ Fire Barrier Sealant FD 150+

Options available